This Downdraft Spraybooth/Oven Combination was designed with the latest technology. Through extensive research and development, UniCure has designed this product with the flexability to meet your installation requirements.
No on-site floor construction is required for basement or side exhaust models.
UniCure 1000's quality in construction and air flow technology are unsurpassed by any booths foreign or domestic.
Spray Cycle - 100% Fresh Air
UniCure 1000's spray cycle provides you with the control necessary for quality finishes using todays clear coat systems.
Outside air is increasingly filtered before entering the booth. Then overspray is filtered out as the air is exhausted.
Curing Cycle - 100% Fresh Air
To conserve energy, the UniCure System's air flow is reduced by 50% using 100% fresh air during the curing cycle.
The energy efficient curing cycle means more cars can be painted correctly in a given amount of time.
UniCure 1000 will give you the control curing that is required by the paint manufacturers for their differnt types of paints.
This UniCure Spraybooth Comes Complete
Galvanized Construction 18 Gauge, Pre-Punched Holes
Doors: 2" Bi-Fold Double-Wall
(1) Personnel Door with Window
UniCure Heated Air Makeup System*
Full Function Remote Control Panel
34" Exhaust Fan with Balance Control System
Gable and Side Lighting
12 4-tube Light Fixtures with Tubes
Micro Filtering Ceiling
(1) Exhaust Duct Clean Out
(2) Extra Sections of Ductwork
Automatic Exhaust Stackhead
Prefilters
Ceiling Filters
Exhaust Filters
Options:
Powder Coted White (Inside & Out)
Downdraft Side Exhaust
Downdraft 3-Row Pit
Downdraft Full Grated Basement
Drive-Thru door with or without windows
1-800-868-3033
Safety Features:
Air Safety Interlock Valve
Interlock Switches for Doors
Magnehelic Gauge
Outside Dimensions
Inside Dimensions
Length
23' - 10"
Length
23' - 6"
Width
16' - 4"
Width
14' - 0"
Height
11' - 0"
Height
9' - 0"
Door Height
8" - 10"
Door Width
9' - 4"
*Note
Heated Air Makeup can be mounted on either side, rear or ceiling.
This booth is constructed of 18 gauge electro-galvanized sheet steel. Precision punched and bolted on six inch centers for maximum rigidity. Panels have exterior flanges to provide a smooth interior surface.
Exhaust units and motors supplied are based on the booth installed with a maximum of 25' straight exhaust ducting. When additional ducting or elbows are used, a higher output fan and larger motor might be required. If so, consult your factory representative.
